و أخيرا firmware comtrend CT-5367

بعد بحث دام لمدة كبيرة صادفني هذا الفيرموار للروتير comtrend CT-5367

Board ID 96338A-122

657003-243(CT-5367-CFE-A111-312ETB-C02_R01).bin

نرجوا من المشرفين و العارفين في هذا المنتدى التثبت من هذا الملف

لست مسؤولا عما يصيب أجهزتكم

التحميل

اقتباس:

Board ID 96338A-122

It seems possible this model to run OpenWRT but of course not without ADSL and Wi-Fi as Wi-Fi is GPIO-based.

Entry into the standard linux shell telnet console:

> Sysinfo; sh

Trying 192.168.1.1 ...
Connected to 192.168.1.1.
Escape character is'^]'.
TELNETD launched
BCM96338 ADSL Router
Login: root
Password:
> Adsl info
adsl: ADSL driver and PHY status
Status: Showtime Retrain Reason: 0
Path: 0, Upstream rate = 2040 Kbps, Downstream rate = 16511 Kbps
> Sh
> Sysinfo; sh
Number of processes: 23
6:00 pm up 2 min,
load average: 1 min: 0.12, 5 min: 0.10, 15 min: 0.04
total used free shared buffers
Mem: 14020 12148 1872 1452 0
Swap: 0 0 0
Total: 14020 12148 1872

BusyBox v1.00 (2010.07.02-08:39 +0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# Dmesg
Linux version 2.6.8.1 (jojopo @ broadcom-eu) (gcc version 3.4.2) # 1 Fri Jul 2 16:37:00 CST 2010
Parallel flash device: name MX29LV320AB, id 0x22a8, size 4096KB
96338A-122 prom init
CPU revision is: 00029010
Determined physical RAM map:
memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
DMA zone: 4000 pages, LIFO batch: 1
Normal zone: 0 pages, LIFO batch: 1
HighMem zone: 0 pages, LIFO batch: 1
Built 1 zonelists
Kernel command line: root = 31:0 ro noinitrd console = ttyS0, 115200
brcm mips: enabling icache and dcache ...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 64 (order 6: 512 bytes)
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13932k/16000k available (1434k kernel code, 2048k reserved, 205k data, 68k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop ... 239.20 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction ... unavailable.
NET: Registered protocol family 16
Total Flash size: 4096K with 71 sectors
File system address: 0xbfc10100
Cant analyze prologue code at 80175454
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
SES: Button Interrupt 0x0 is enabled
SES: LED GPIO 0x8005 is enabled
Invalid External Interrupt definition
Serial: BCM63XX driver $ Revision: 3.00 $
ttyS0 at MMIO 0xfffe0300 (irq = 10) is a BCM63XX
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 68k freed
Algorithmics / MIPS FPU Emulator v1.5
atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6338A2 Ethernet Network Device v0.3 Jul 2 2010 16 و أخيرا firmware comtrend CT-5367 36

18
Config Ethernet Switch Through MDIO Pseudo PHY Interface
ethsw: found bcm5325e!
dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
eth0: MAC Address: 00:1 D: 20: EF: 13:37
eth0 Link UP.
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Trying to free free IRQ25
BcmAdsl_Initialize = 0xC00663D8, g_pFnNotifyCallback = 0xC0080FD4
AnnexCParam = 0x7FFF7EB8 AnnexAParam = 0x00003987 adsl2 = 0x00000003
pSdramPHY = 0xA0FFFFF8, 0x1B78B7 0xDEADBEEF
AdslCoreHwReset: AdslOemDataAddr = 0xA0FF4834
AnnexCParam = 0x7FFF7EB8 AnnexAParam = 0x00003987 adsl2 = 0x00000003
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init!!!
device eth0 entered promiscuous mode
br0: port 1 (eth0) entering learning state
br0: topology change detected, propagating
br0: port 1 (eth0) entering forwarding state
ADSL G.994 training
device nas_0_0_35 entered promiscuous mode
br0: port 2 (nas_0_0_35) entering learning state
br0: topology change detected, propagating
br0: port 2 (nas_0_0_35) entering forwarding state
device eth0 left promiscuous mode
br0: port 1 (eth0) entering disabled state
device nas_0_0_35 left promiscuous mode
br0: port 2 (nas_0_0_35) entering disabled state
device eth0 entered promiscuous mode
br0: port 1 (eth0) entering learning state
br0: topology change detected, propagating
br0: port 1 (eth0) entering forwarding state
device nas_0_0_35 entered promiscuous mode
br0: port 2 (nas_0_0_35) entering learning state
br0: topology change detected, propagating
br0: port 2 (nas_0_0_35) entering forwarding state
ADSL G.992 started
ADSL G.992 channel analysis
ADSL G.992 message exchange
ADSL link up, interleaved, us = 2040, ds = 16511
ATM Soft SAR: ATM link connected.
#

و أخيرا firmware comtrend CT-5367

و أخيرا firmware comtrend CT-5367

روابط مفيدة